英文S2014_ノンブル無し_高
27/128

GENERAL DESCRIPTION•All functions can be set by 3 push button switches.•Independent ON/OFF setting.•ON Delay timer function.•Pressure calibrationSPECIFICATIONSSupply voltage: 230V. AC±10% 50/60HzOutput contact rating: 125/250V. AC 1A(cosφ=1) SPSTDelay timer function: 0 to 240 sec (step=1sec.)Fluid: Refrigerants (excluding ammonia), water, air.Ambient temp. range: −10 to 60°CStorage temperature range: −10 to 60°CPressure connection: 7/16–20UNF male flare 1/4"Enclosure: IPX2*In case pressure decrease than the ON pressure during working of Delay timer, timer is reset, and does not turn on.*In case pressure decrease than the ON pressure during working of Delay timer, timer is reset, and does not turn on.OPERATIONOPERATION PATTERNDIMENSIONSWIRINGOutputNOCPowersupplyPowersupplyLoad power supplyPressure switch unitLoadOUTPUT RelayOUTPUT RelayPressDelay timerONOFFONOFFPressTimeTimeOFFONONOFFDelay timerOutput Relay OFFONOFFOutput Relay ONPress. IncreaseOutput Relay OFFOFFONOutput Relay ONPress. Increase1/4" Flare Nut Attached53.626.632.512.825252-M4×0.7Screw mounting pitch9065.829.2DIGITAL PRESSURE CONTROLS Type CFEUnit: mm mark applicable (available upon request)During Set Low (LoC)During Set High (HiC)During Set Low (LoC)During Set High (HiC)DELAY TIMER OPERATION PATTERNTYPE NUMBER SELECTIONUnit: MPaCatalog No.Setting/Indication RangeSetting resolutionCalibration rangeAirtight PressureWt. (kg)Min.Max.CFE–SC10B–001−0.0950.9950.005±0.033.850.29CFE–SC35B–00103.50.02±0.12CFE–SC50B–00105.00.02±0.35.5CFE–SC10B–101−0.95 bar9.95 bar0.05 bar±0.3 bar38.5 barCFE–SC35B–1020 bar35 bar0.2 bar±1.2 barCFE–SC50B–1030 bar50 bar0.2 bar±3.0 bar55 bar

元のページ 

10秒後に元のページに移動します

※このページを正しく表示するにはFlashPlayer10.2以上が必要です