英文S2014_ノンブル無し_高
26/128

GENERAL DESCRIPTION•For use on any application where the relationship between two pressure is critical to proper equipment operation.•With SPDT contact mechanism.•Available drip proof enclosure for marine application or explosion proof enclosure for special application.•Mounting bracket is supplied as standard.•Stainless steel models are available upon request.PRESSURE CONNECTIONSDIMENSIONS1/4" Flare7/16-20 Thread1/4"Flare Nutφ2.4×1000Capillary TubeMP1.5MPa0.250.20.150.10.050.10.20.35RANGEDIFF.20.563.120.5(B)(D)(C)(24)80(20.8)(22.4)(50)25±0.5(17.3)φAH PMPa4-M4×0.7Thread MountingHole for Bracketφ6(1/4") Flare NutStandardDIFFERENTIAL PRESSURE CONTROLS Type WNSUnit: mm mark applicable (available upon request) UL recognized (available upon request)Refer to page 43, 44.・HP......High Side Press. LP......Low Side Press.・Enclosure: IP20・Drip proof models: Available upon request. (Refer to page 49.)・Please contact us if other range models are required.TYPE NUMBER SELECTIONFor water, air and fluorinated refrigerantUnit: MPa {kgf/cm2}Catalog No.RangeDifferentialFactory SettingMax. WorkingPressureLimit ofPress. Differential(HP>LP)Wt. (kg)Min.Max.Min.MaxOffOnWNS–C102X0.03 {0.3}0.2 {2}0.03 {0.3}0.15 {1.5}0.05 {0.5}0.02 {0.2}0.5 {5}0.5 {5}0.43WNS–C106X0.05 {0.5}0.35 {3.5}0.05 {0.5}0.25 {2.5}0.1 {1.0}0.05 {0.5}1.5 {15}1.5 {15}ELECTRICAL RATINGSCONTACT FUNCTIONS153↑: Operating direction on press. increase at High Press. SideRated Voltage (V)Rated Amps. (A)Power Factor (cosφ)125/250V. ACNon-Inductive Current112Inductive Current Full Load0.75Locked Rotor0.45721Common Terminal3Close on Pressure Increase5Close on Pressure DecreaseCatalog No.Unit: mmφABCDWNS–C102X38.547.436.7147.2WNS–C106X34.444.433.7141.2SPECIFICATIONS•Fluid temperature: -20 to 120°C•Ambient temperature: -20 to 70°C

元のページ 

10秒後に元のページに移動します

※このページを正しく表示するにはFlashPlayer10.2以上が必要です