英文S2014_ノンブル無し_高
19/128

Catalog No.RangeDifferentialFactory SettingMax. Working PressureContact FunctionWt. (kg)Min.Max.FixedOffOnHNS–C130X0.8 {8}3 {30}0.3 to 0.5{3 to 5}2 {20}1.6 {16}3.3{33}Diagram 10.24Catalog No.RangeManual Reset Factory SettingMax. Working PressureContact FunctionWt. (kg)Min.Max.OffOnHNS–C130XM10.8 {8}3 {30}Automatic operation on pressure increase, and manual reset.2 {20}ManualReset3.3{33}Diagram 20.24TYPE NUMBER SELECTION (SPECIFICATIONS)Automatic reset typeUnit: MPa {kgf/cm2}SINGLE FUNCTION PRESSURE CONTROLS Type HNSGENERAL DESCRIPTION•Type HNS is high pressure controls with fixed pressure differential and safety cut out. •Enclosure: IP20(With the upper lid: IP44)ELECTRICAL RATINGS・Drip Proof Models: Available upon request. (Refer to page 49.)Minimum contact capacity: 50mAManual reset typeUnit: MPa {kgf/cm2}PRESSURE CONNECTIONS1/4" Flare7/16-20 Thread1/4"Flare Nutφ2.4×1000Capillary TubeCONTACT FUNCTIONS153153135135M1M2(59)(19)(17.4)φ229.463.1(91)φ6(1/4")Flare NutReset Button(54)(48.8)33.44-M4×0.7Thread MountingHole for Bracket(20.8)25±0.5(17.3)RangeAdjusting ScrewStandardDiagram 1Diagram 2DIMENSIONSStandard↑: Operating direction on press. increase at High Press. Side M1↓: Operating direction on manual resetRefer to page 43, 44.Unit: mm mark applicable (available upon request) UL recognized (available upon request)Rated Voltage (V)Rated Amps. (A)Power Factor (cosφ)125/250V. ACNon-Inductive Current112Inductive Current Full Load0.75Locked Rotor0.4572Diagram 1 & 21Common Terminal3Open on Pressure Increase5Open on Pressure Decrease

元のページ 

10秒後に元のページに移動します

※このページを正しく表示するにはFlashPlayer10.2以上が必要です